// Brother WP-2200 Art Controller
#include <WiFi.h>
#include <WebServer.h>

#define MOTION_PIN 2
#define MIC_PIN A0
#define TYPEWRITER_TX 17
#define TYPEWRITER_RX 16

WebServer server(80);
String artMessages[] = {
  "Motion detected...",
  "Sound creates art...",
  "Interactive moment...",
  "Digital poetry..."
};

void setup() {
  Serial.begin(115200);
  Serial2.begin(9600, SERIAL_8N1, TYPEWRITER_RX, TYPEWRITER_TX);
  
  pinMode(MOTION_PIN, INPUT);
  
  // Connect to WiFi
  WiFi.begin("ArtNetwork", "password");
  
  // Setup web server
  server.on("/", handleRoot);
  server.on("/trigger", handleTrigger);
  server.begin();
  
  Serial.println("Brother Art System Ready!");
}

void loop() {
  server.handleClient();
  
  // Check motion sensor
  if (digitalRead(MOTION_PIN)) {
    triggerArt("motion");
    delay(5000); // Prevent spam
  }
  
  // Check sound level
  int soundLevel = analogRead(MIC_PIN);
  if (soundLevel > 2000) {
    triggerArt("sound");
    delay(3000);
  }
}

void triggerArt(String trigger) {
  String message = getArtMessage(trigger);
  typeMessage(message);
  
  // Log to web interface
  Serial.println("Art triggered by: " + trigger);
}

void typeMessage(String msg) {
  for (int i = 0; i < msg.length(); i++) {
    Serial2.write(msg[i]);
    delay(100); // Typing speed
  }
  Serial2.write('\n');
}

String getArtMessage(String trigger) {
  int index = random(0, 4);
  return trigger + ": " + artMessages[index];
}